XaMp.imomo.net

firesound · Joined: 21 Oct 2006 Posts: 1 Location: us

this is a GREAT idea!!!!!
i had been looking for a plugin for winamp or wmp9 and found this
great idea
the problem is the sound quality...completely un-listenable
way saturated and to hot---the studio edition ersion 0.4.4 build 0
however the desktop version version 1.4.1 sounds fine
i have ffd show installed along with a fancy sound card (m-audio omni I/O)-i mention this only for system configuration

also have an on board sound card (nvidia card that everything is routed through)
I have tried every conceivable configuration to no avail
turned off ffd show codecs turned them on again tried different settings
tried turning off the EQ on studio
tried different volume configurations
tried the fancy sound card
reboot
reinstall
NOTHING clears up the sound
but....Xamp desktop sounds fine
as does every other audio format and device
I can stream with firefox and IE6
but studio is great...just bad sound quality
any ideas?----
ya--i know stick with desktop for now
i have both installed can't remember the order
think i tried studio first-both are installed currently
if you can't help me...perhaps this is a bug someone else has discovered
perhaps it can be fixed in the next release
mabey i am missing something
i have searched everywhere for suggestions...i may be the only one
let me know
great concept...great prog
ps. one more request
love to be able to copy song/artist text from the main window in either version....even export tune notify to a .txt file or just be able to copy paste without having to go to the registry
streaming through a browser window you can copy the song info
i save this on a wish/favourites list in a .txt file

thanks for all the hard work
keep fighting the good fight
let me know

firesound

XP SPII-5.1 (Build 2600)
AMD athlon XP 2500+ (Barton)
1.5 gig ram
current versions of both xamp's
NVIDIA nForce audio 5.10
M-Audio Delta (omni-IO)

realjag · Joined: 24 Oct 2006 Posts: 4

I having sort of the same issue. I downloaded at work yesterday and installed on my laptop and it worked great! Terrific program.

That night I downloaded at home and installed. When I connected, the audio was horrible! Impossible to listen too.

What's interesting is that I also have onboard sound. Everything I use with that machine sounds fine though including XaMp Desktop.

m0mo · Site Admin Joined: 17 Jun 2005 Posts: 134

i will look into this as these are the first 2 reports of it that i have seen.

there is a way to export the data to a text file
_________________
help support XaMp - paypal (no cc): xampd at imomo.net

realjag · Joined: 24 Oct 2006 Posts: 4

realjag · Joined: 24 Oct 2006 Posts: 4

Never mind. My problem has been fixed. I finally had a chance to get out and get a sound card. I disabled my onboard sound chip and installed the card and now XaMp studio works fine. Thanks.

m0mo · Site Admin Joined: 17 Jun 2005 Posts: 134

realjag · Joined: 24 Oct 2006 Posts: 4

Hi Momo,

To the best of my recollection of the motherboard and searching online, I think it's a Realtek ALC850. I will check for sure when I get home tonight.

thomasshawn · Joined: 15 Jan 2007 Posts: 1

Horrible sound. I love Xamp desktop but after the latest forced windoze update and WMP 11 update I'm forced to move to studi, whhich I have to admit is VERY cool. But I also have totally unbearable distortion and NO effect from volume control within studio. It's like studio is driving it at too high a volume and won't let you turn it dwon. i also am runing an Nvidia chipset with nForce audio drivers. Does this help?

smy · Joined: 28 Feb 2007 Posts: 1

Same problem here. Vol Control does not work at all, sound is VERY distorted and LOUD!!!

Navidia Chipset
Sound Card is: Realtek ALC850 (same as realjag)

Matbe it is a incopatibility with this card???

m0mo · Site Admin Joined: 17 Jun 2005 Posts: 134

there seems to be a problem with floating-point channels and nForce audio driver.

give the Realtek driver a try.
_________________
help support XaMp - paypal (no cc): xampd at imomo.net